Fighting rust on a car body
Operation “Stop Rust”: ridding the car body of saffron milk caps and traces of rust on your own
A red scourge called rust plagues many car enthusiasts. The less protected the car body is from corrosion at the factory (galvanization), the more often the owners will have to make efforts to eliminate red spots. Moreover, it is undesirable to delay liquidation, since over time, damage to the metal only increases. As a result, in six months you will have to spend much more time and money than today. So, what will you need to remove rust and saffron milk caps with your own hands and how to remove them without harming the body.
Causes and places of rust on a car body
Rust is the oxidation of metal that occurs under the influence of air, water and static electricity. Therefore, the main reason for its occurrence is damage to the paintwork of the car body. Microcracks and physical damage allow air and moisture to reach the iron. The speed of the destructive impact will depend on the degree of protection of the body itself and the aggressiveness of the environment. This is especially true in winter, when many chemicals appear on our roads.
The above factors directly affect the shape, color and depth of corrosion. People call them differently: “saffron milk caps,” “bugs,” or simply “rusty spots,” but their essence is the same (only the degree of neglect varies). A single spot of rust is easier to deal with than many small red spots. The latter usually indicates poor quality metal or unsuccessful body repairs. The total processing area will be larger. Moreover, these points often spread in depth rather than in breadth. Blistering of the paint also signals the need to remove corrosion that has begun to develop under the paintwork.
The most common places for bugs and rust spots (photo)
Rust progresses well in places where there is increased exposure to foreign objects: sand, dirt, stones. The hood suffers from small stones from the tires of other cars, the wheel arches from their own “emissions” (by the way, wide non-standard tires or rims contribute to greater damage). The thresholds of the car are also one of the first to rot due to the close proximity to the “aggressive environment”, plus unsuccessful exits from curbs aggravate the situation.
How to delete: options
We have become acquainted with the causes and places, let's move on to methods of correct elimination. There are two methods that differ in the way they remove rust:
- Mechanical - cleaning, priming, puttying, painting.
- Chemical - rust converters or kits for galvanizing metal.
You cannot do without the first method if the rust is strongly ingrained into the metal.
Then it is necessary to completely eliminate traces of corrosion until pure iron (ideally shiny) remains. To do this, you may need additional tools and resources, which we will discuss below in step-by-step instructions. The second option is suitable for hard-to-reach places.
These could be curves on the bottom of the car or the inside of the arches, which are difficult to process using mechanical means. Depending on the product, rust after chemical treatment can turn into foam (you need to rinse with water and dry the surface) or harden and become covered with a protective layer suitable for painting. Be sure to read the instructions and recommendations for the use of chemicals before purchasing. Before starting work, try to assess the extent of damage to the body and assess whether you can etch the damage with chemicals alone. For a positive result, it is necessary that “live” iron remains after the initial cleaning. If there are through holes or the final thickness of the metal after processing is too small, then more serious body repairs will be needed, that is, initially all these areas will need to be repaired using welding or putty with fiberglass.
Reviews of the most popular tools and methods
The ideal option is orthophosphoric acid. Apply a thin layer to the camelina, wait 10–30 seconds, wipe dry with a cotton pad. It eats up rust and forms a phosphate film that is not afraid of water and is inert.
Maxim Leonov
http://avto-flot.ru/blog/kak-udalit-rjavchinu-s-kuzova-avtomobilya-i-ostanovit-ee-rasprostranenie.html
I already tried orthophosphorus - this is still an old-fashioned method, I processed what I cleaned. (As far as I know, all these inhibitors and converters are what it is, only in multi-colored bottles). Indeed, almost cleaned surfaces, this rubbish gets rid of rust residues. But untouched, so to speak, terry thickets of corrosion do not particularly react to it. So, they sizzle a little, darken, turn pale and remain in place.
Saf
http://forums.drom.ru/4×4/t1151267034.html
Nowadays, people no longer burn at the stake for the magic of transforming rust into pure and white metal, but a miraculous transformation does not happen either. And the zealous body workers continue to sand, etch, putty, treat with filler... And that’s why - because you can’t pull it out without difficulty... It’s impossible, you know, to rub it with a cloth and for it to become overgrown - it doesn’t happen. So go ahead, Shura, go ahead...
Zaika 2106
https://forum.auto.ru/chemistry/22048/
Mechanical method (step by step instructions)
If you follow the instructions and take your time, you can forget about rust on your car for 1-2 years (at least in the treated areas). The work is carried out in stages:
- preparing everything necessary;
- initial cleaning of the damaged part of the body;
- degreasing and priming;
- painting and varnishing.
DIY Tools and Supplies
To work you will need:
- grinding tool and sandpaper,
- rust converter,
- solvent,
- anti-corrosion primer,
- paint to match the body color and clear varnish (in cans),
- if necessary, two-component automotive putty (with hardener).
- You can fight rust using a sandblaster, an angle grinder with a grinding wheel, a drill with a special attachment, or the trivial, but always accessible, method - with your hands and sandpaper.
The work can be done manually or using special machines
The main thing is to work carefully and slowly. There should be no deep scratches or rough transitions. Try to get a polished surface with smooth gradients.
A grinder is often included in a car enthusiast’s arsenal.
The damaged paintwork is removed layer by layer and subsequent damaged areas are processed.
The longevity of the result depends on the thoroughness of the work.
Universal types of putty, oddly enough, are not suitable for all types of car bodies
It is applied in several layers and each one is sanded until smooth. Your goal is to fill all the depressions and achieve a perfectly smooth surface when the work is completed.
To work, you will need several types of sandpaper.
Do not skimp on protective equipment, especially if you are doing the job for the first time.
Film, newspapers and masking tape are perfect for this. If you work outside, be sure to consider the direction of the wind.
Make sure that dust and other abrasive particles do not fall on the treated surface.
Painting work requires minimal skills!
The result is not always the same as in the photo; it is often necessary to modify and eliminate flaws
A good way to remove and repair rust on a car door (video)
Do-it-yourself chemical way to get rid of corrosion
The chemical method differs only in the initial stage - cleaning the part from rust. According to reviews from manufacturers, these substances are able to eradicate rust, stop its further spread and do not damage the iron itself (unlike “sandpaper”). Application is very simple - apply the product to the rusty surface for 30-40 minutes, then wipe with a cloth or rinse with water. But to get a nice, smooth surface you will still have to clean, putty and polish (except for the initial stages of corrosion).
Some funds are available to motorists even with the most modest budget
There are kits on sale that allow you to independently apply a protective layer of zinc to the car body. The kit already contains a solution for removing rust and applying a protective layer, as well as an electrode with a zinc tip. This process is electrochemical, so a connection to a battery is required.
The kit includes liquids and all necessary working tools
How to remove “saffron milk caps” and “bugs”
Many people want to believe that if rust has just appeared and the lesions are small, then they can be eliminated with some miracle remedy. Unfortunately, this is impossible in principle. The rust that appears on the surface of the paintwork is like the tip of an iceberg; the main damage is deep inside.
There are products on sale that will help remove the red color from the body. For example, there is Anti-Rust paste - it removes red spots quite quickly and well. This is the same rust converter that we discussed above. It eliminates the visible signs, but not the source itself. Such manipulations usually last for 2–6 weeks (depending on weather conditions), and they are most often used immediately before selling the car.
Small “bugs” sometimes cause big problems for the car seller!
If you want to get rid of the problem in the long term, then you cannot do without physical intervention. It is necessary to stop the access of air and moisture directly to the metal. Theoretically, you can prolong the effect of the paste if, after treatment, you cover the damaged area of the body with clear varnish. But it will work if the converter has managed to remove all the rust. In most cases, this does not happen, since the depth of penetration of the product is small.
Unfortunately, it will not be possible to hide damage for a long time only with the help of paste.
Vehicle prevention and protection
Tools available to every motorist, but which most of them ignore, will help you avoid the work done:
- regular car washing, even in winter (additional waxing increases protection against aggressive environments);
- regular inspection of a clean car (in the initial stages it is much easier to fix the problem);
- wheel arch liners and mudguards on all wheels (will keep the paintwork presentable for much longer);
- anti-gravel film on the hood and part of the roof above the windshield (an alternative is a “fly swatter”);
- anti-corrosion treatment of the bottom of the car.
The work of eliminating “bugs” and “saffron milk caps” is within the power of everyone. But for a good result it will take scrupulousness and time (especially the first time). Think about whether you are able to prevent such sources of trouble. Advanced corrosion leads to expensive body repairs without guarantees. Take care of your car, and it will reciprocate.
DIY car corrosion control
The fight against car corrosion often causes a lot of problems for its owner. For this, three main methods are used - passive, active and electrochemical, but each of them has its own advantages and disadvantages. Most often, corrosion is removed using special means. And for preventive purposes, a protective film is glued to the bottom, body thresholds and other hidden places or treated with mastic. There are also other preventive measures, which we will talk to you about later.
Causes of corrosion
First, let's figure out why corrosion processes occur. The fact is that there are four types of corrosion of metal surfaces - electrochemical, chemical, hydrogen and oxygen. In the context of rusting of an automobile body, only the first two types occur.
Electrochemical corrosion occurs due to the fact that two materials with different reducing properties interact through an electrolyte (any non-distilled water is such). Since iron has low reducing properties, it is significantly susceptible to rusting. Chemical corrosion occurs due to the interaction of the metal surface and a corrosive environment. The latter role can be played by oxygen at high temperatures. Understanding the essence of the emerging processes gives us the basis for searching for methods to combat corrosion.
Types of corrosion control
There are two main ways to protect a car body from corrosion. The first is barrier protection. It does not allow physical interaction of the surface of vulnerable metals with the external environment. This is expressed in the use of paint and varnish coating and various mechanical means and protection. The second is tread protection. An example of this is galvanizing, because zinc has a more negative potential than iron. Accordingly, if you connect them, then in such a pair the iron will be reduced and the zinc will corrode. However, since there is an oxide film on the surface of zinc, this process occurs very slowly.
As mentioned earlier, there are three main types of car corrosion control:
Corrosion Removal Brushes
- Passive.
- Active.
- Electrochemical.
The passive control method involves the use of paintwork on the body. The car owner’s task in this case is to maintain the integrity of the paintwork. Do not allow small chips or scratches to appear on its surface. This method also includes periodic washing of the car, as well as the use of additional protective agents - wax, liquid glass, and so on.
An active method of combating car corrosion means the use of special anti-corrosion materials and mastics. They differ depending on what areas of the body they are used for. For example, the underbody of a car is often treated with an anti-gravel coating. As a rule, these compositions are based on fine aluminum powder. There are also special anti-corrosion agents for wheel arches. Most often, the so-called liquid locker (strong elastic material) is used for this. A separate class are anti-corrosion materials for hidden cavities. They are designed for processing thresholds, pillars, side members, floor reinforcements and other surfaces.
The electrochemical method of combating metal corrosion on a car body involves using a special electronic device that contains an electrode designed to take on the corrosion. Simply put, it is not the machine body that will rust, but the mentioned electrode. This method is very effective, but its significant disadvantage is its high price.
How to remove corrosion from a car
Now let's move directly to the methods and means of combating corrosion on a car with our own hands. First of all, it is necessary to mechanically remove rust from the surface. And do it very carefully! For these purposes, sandpaper, various abrasive wheels on a drill or grinder, as well as sandblasting are used. It is the latter tool that most effectively cleans the affected surface.
Special compounds are also used to remove corrosion. The simplest thing in this case is to use a weak solution of hydrochloric acid and then remove it.
However, the most reliable method of controlling corrosion is to use rust converters or rust modifiers. They convert iron oxide to iron tannate. As a rule, they contain polymers that act as a primer.
Car rust converters convert corrosion into a layer of iron and zinc phosphates and chromates. They are also sometimes used to treat uncorroded metal before applying primer to prevent future corrosion and improve the degree of adhesion of the paintwork to the metal surface.
Independent fight against car corrosion has the following sequence:
-
Degreasing the surface. To do this, you can use various means, for example, alcohol or white spirit.
Removing rust from the body
Remember that all work must be carried out carefully, since even a small rust stain can grow significantly over time.
The rusty seam is visible
Always check the condition of the welds on the machine body. Remember that they are the most vulnerable to corrosion. In particular, its intercrystalline type, which is especially dangerous. The consequence of its appearance is an imperceptible loss of ductility and strength of the metal. Thus, the boundaries of welded grains are destroyed chaotically, and the areas of structural transformations turn into an anode, which intensively dissolves. Moreover, this phenomenon can be observed not only on iron car bodies, but also on stainless steel, aluminum, chromium-nickel and chromium alloys. Corrosion in this case threatens to chip away individual grains of metal, which is why the seam and the body as a whole gradually lose their mechanical properties.
The most rust-prone areas of the car body are the lower parts of the door panels, sills, front fenders, box sections of the lower body, and the inner surface of the wheel arches. Due to the fact that access to the listed places is difficult, there is always a risk of not noticing the appearance of rust spots. Check their condition in the inspection pit or on a lift!
Popular rust removers
Currently, there are dozens of different rust converters in auto stores, and their range may vary in different regions of the country. Therefore, it makes no sense to give recommendations regarding the purchase of this or that product. But we will still give as an example several names of popular compounds that are common among car owners. So:
Popular remedy "Tsinkar"
- "Tsinkar";
- "Movil";
- Hi-Gear line of rust converters;
- "Chain mail";
- Sonax;
- "SF-1";
- Runway;
- Permatex;
- Bitumast;
- "Phosphomet".
It must be remembered that with the help of any converter you can fight rust, the layer of which does not exceed 0.1 mm. In addition, the active components only fight stubborn rust. It is better to remove its loose component mechanically (using sandpaper, a knife, a metal brush, sandblasting, and so on).
The choice of one product or another should be based on the range, its composition, and price. Fortunately, they are inexpensive, so if the purchased product turns out to be ineffective, you can always buy another one.
How to quickly and permanently remove rust from a car body
The appearance of rust on a car body is an unpleasant occurrence for every car owner. In this article we will tell you how to quickly and easily remove rust stains from a car body using available means. All methods are simple and effective, you can easily do them yourself.
Corrosion formation
Metal corrosion , or simply rust, appears as a result of metal oxidation under the influence of the environment. The main reason for its appearance is damage to the paint on the car body.
All resulting scratches and chips sooner or later become a source of rust formation, which gradually spreads deeper into the stain and over the entire larger surface area of the body.
The rate at which corrosion spreads depends on the aggressiveness of the environment and the condition of the body itself. For example, in the winter season it spreads many times faster.
It is much easier to deal with a single rust stain that has just appeared than with multiple “saffron caps” or an old stain where the metal is corroded almost completely.
The appearance of corrosion that is not yet visible to the eye is indicated by swelling of the paintwork. Such areas should be immediately cleared of old paint and cleaned.
Vulnerable places
The areas that experience the greatest mechanical stress are the most susceptible to corrosion. These include:
- thresholds are among the first to suffer from corrosion;
- hood - small pebbles from the vehicle in front provoke the appearance of numerous chips;
- wheel arches are constantly exposed to aggressive chemicals.
It is important to promptly detect emerging rust and eliminate it, preventing the further spread of corrosion. To do this, you need to know how you can deal with this unpleasant phenomenon yourself.
Corrosion Removal Methods
Corrosion can be eliminated in the following ways:
- Mechanical - used for severe corrosion, it involves removing rust by stripping down to metal, followed by priming, puttying and painting the area of the body being repaired;
Advantages of the method : elimination of large and deep stains, damage under swelling paint, as well as low cost and availability of necessary materials.
Disadvantages : length of the process.
- Chemical - involves using rust removers. Such reagents are widely represented on the modern market.
Advantages of the method: elimination of corrosion in hard-to-reach places, higher process speed.
Disadvantages: inability to use on heavily damaged areas.
Let's consider the process of eliminating corrosion using each of the methods presented above in more detail.
Step-by-step instruction
Before starting repair work, it is necessary to inspect the body and identify all problem areas. Assess the degree of damage and decide on a method to eliminate corrosion.
Tools and materials
Before starting work you need to prepare:
- grinder;
- sandpaper;
- degreaser;
- putty;
- primer;
- paint;
- car varnish;
- rust converter;
- masking tape;
- clean cloth.
Mechanical method
Removing rust stains mechanically is carried out in several stages:
- cleaning corrosion down to metal with sandpaper. The work can be done manually or using a power tool, such as a grinder. The stain should be cleaned gradually and carefully, avoiding rough scratches. It is important not to damage entire areas of the paintwork and to carry out 100% complete stripping down to “bare” metal.
- treating the prepared area of the body with a rust converter in order to eliminate the smallest corrosion residues that are not always visible to the eye.
- degreasing the surface after the converter ends (on average after half an hour);
- putty (carried out in several layers if necessary) and grinding of the treated surface;
- painting in body color (before painting, protect adjacent parts of the body with newspapers and masking tape and apply an anti-corrosion primer in 2-3 layers). Painting is also carried out in 2-3 layers, each thoroughly drying.
- application of clear varnish (if desired) for more reliable protection and a beautiful appearance.
The result of the work will depend entirely on compliance with all instructions and the correct execution of the work. If the technology is violated, for example, due to poor-quality cleaning or insufficient drying, the result of the work may be completely short-lived.
Watch a video on how to remove rust from a car in 10 minutes:
Chemical method
The significant difference between this method and the previous one lies only in the first stage - cleaning from rusty stains. Instead of mechanical cleaning, specialized chemicals are used. It can remove rust and prevent its further spread without damaging the metal.
As a rule, such preparations are applied to the problem area in accordance with the manufacturer's instructions for the specified time, after which the remaining product is wiped off or washed off.
However, to obtain an excellent and long-lasting result, you will also have to putty, sand and paint. When eliminating minor damage to the body, you can do without these steps.
Popular drugs
The most popular chemicals for removing rust from a car body with your own hands are:
- orthophosphoric acid is the most well-known remedy; it can be used in its pure form or be part of various chemistry;
- VSN-1 Neutralizer - easily copes with rust, turning it into a dark mass;
- zinc - a kit for removing rust and further galvanizing the metal by applying a special protective layer using an electrochemical method. Requires connection to battery. The process of working with the Zinkor product can be seen in detail in the video clip:
How to remove rust from a car body
Stories about the “eternal body” of salespeople at a car dealership very often become a legend. After several years of operation, you can notice the first “bugs” and corrosion will cost only local repairs. However, if you miss even one scratch, rust will trigger an entire rescue operation to restore the integrity of the body.
Causes of rust on a car body
If we consider it from a scientific point of view, corrosion is the oxidation of metal layers under the influence of air and water. As a result of the reaction, compounds of hydrated iron oxide appear on the body - a loose red powder.
In general, the appearance of rust is influenced by :
- Design factory solutions. Each body is made of thin sheets of metal and, due to its streamlined shape, requires a large number of joints and welding joints. The material chosen by the manufacturer must have minimal resistance to destructive oxidation processes and contain a proportional amount of alloying substances.
- Exploitation . Even the strongest body will not withstand storage in damp conditions or outdoors, especially in winter. To extend the life of your car, it is better not to neglect timely technical inspection and careful driving style. Roads in Russia cannot boast of their quality. Gravel and salt scratch the paintwork and primer at high speed, causing moisture to fall directly onto the metal layer.
Scientists from Sweden have found that the following are at greater risk of corrosion: sills, pillars, spring bases, bottom, doors and side members.
- Environmental factors . Residents of humid climates are out of luck here. High temperature differences contribute to the formation of condensation in the hidden cavities of the car. Ideally, it flows through the drainage holes in the sills and “pockets” of the wings. However, as practice shows, in 80% of cases, condensation remains in place due to leaves and other debris in the drainage gutters.
A thin layer of moisture is constantly present on the surface of the body. Depending on environmental factors, different concentrations of aggressive substances remain on the car as the water dries. As a result, corrosion develops according to the following pattern:
- Rusting under the paintwork.
- Peeling off paint on areas of rust.
- Through holes in the body.
- Damage to welding joints.
- Destruction of power parts of the body.
- Deformation of doorways, thresholds, pillars.
- Loss of vehicle controllability as a result of loss of rigidity of power units.
Types of corrosion on the body and the most common locations
There are two types of metal corrosion :
- Chemical _ Corrosion centers arise due to contact of the metal surface with substances that are not electrolytes. For example: oxidation of metals due to excessive contact with exhaust gases, rust in the fuel system due to additives of hydrogen sulfide, elemental sulfur, mercaptans.
- Electrochemical corrosion. Some areas of the body have different electrical potential. The low value becomes the anode, and the high value becomes the cathode. Each pair forms a short-circuited galvanic cell. As a result, when exposed to electrolytes, only the anodic areas are destroyed, which leads to the formation of rust.
If you neglect corrosion protection during factory assembly or operation, then with 100% probability rust will “eat” the body. Motorists divide types of rust according to their location:
- Non-electrolytes damage the fuel and oil systems.
- Gas - exhaust system, muffler, chamfers of exhaust valve plates of combustion chambers.
- Electrolytes – corrosion due to stagnation of water.
- Contact – deformation in places where the body comes into contact with different electrical potentials.
- Atmospheric – corrosion due to environmental factors.
- Slotted - in narrow places, gaps.
- Structural - appears in places of heterogeneous metal composition.
- In conditions of friction – it affects constant friction units in a corrosive environment.
- Under tension – covers areas of constant voltage.
- Biocorrosion - as a result of the activity of microorganisms.
Washing and drying the car to combat minor corrosion
The first step in the fight against rust is washing. A clean car surface is the key to getting rid of corrosion, since even a small “bug” missed due to inattention can cause great inconvenience in the future.
You can clean the dirt and dust yourself or take the vehicle to a car wash using mechanized means. The engine compartment and luggage compartment must be cleaned for a detailed inspection of the interior surface of the car.
The automotive industry offers various shampoos that not only remove abrasive dust, but also traces of salt and chemical reagents. A pleasant side effect will be the protection of the paintwork. The main thing is that the detergent does not contain toxins, phenols or formaldehydes.
The car must be dried immediately after washing. You can get rid of water droplets using a fan heater or sponge. Natural drying in the sun can lead to staining.
It is also worth noting that you should not forget to clean the body after trips in rainy and slushy weather. This will protect microcracks from clogging. The water temperature during washing should match the air temperature. Sudden changes in temperature damage the metal and wear it out. Using even warm water during cold periods poses a danger to the vehicle.
Elimination of corrosion by electrochemical method
The active cathodic protection method is known as the electrochemical method. It is based on the same principle that provokes electrochemical corrosion. Cathodic protection is a method of restoring one metal and destroying another in the process of their mechanical interaction.
To do this, you will need an electrolyte, a direct current source, and metals with different electrochemical activity relative to iron. First you need to prepare the surface: remove the rust. The electrode is less active than metal and is connected to the charger or to the positive terminal of the battery. The electrode or workpiece must be treated with acid. When the electrode approaches the surface of the electrolyte, bubbling will begin due to the decomposition of ferum hydroxide.
To protect the repair site, you can apply a layer of more active metal to the part and also connect it to a continuous current source. When performing the same actions, galvanization is formed on the surface of the hydrolysis object.
After this, you can wash off the remaining electrolytes from the surface and begin priming and painting. However, if you don’t want to bother with improvised means, there is a ready-made set of materials on the shelves of car stores. It is enough for 1m2 of body surface.
Mechanical method of removing rust
For mechanical cleaning it is customary to use abrasives. For example: using an iron brush you can remove rust on the surface of the body. Disadvantage: It takes a lot of time and effort to clean the entire car body by hand. To make your life easier, you can use a grinder. Using a sanding disc, you need to clean out the corrosion areas by 6–8 mm, and then clean them with fine-grained sandpaper until completely smooth.
To clean large metal objects, it is better to use sandblasters - a mixture of sand and water is supplied under pressure to the “contaminated” area, which effectively fights rust. When working, it is necessary to control the pressure with which the mixture acts on the metal, since if the pressure is too strong, the body can be deformed.
The thickness of the walls being processed must be at least 1 cm, otherwise it threatens the appearance of new holes.
You can get acquainted with the technology for removing rust from the surface of the body in the video:
Tools and materials for DIY rust control
Depending on the chosen rust control method, you will need a different arsenal of tools. However, you definitely need to stock up on patience, detergents and clean rags.
Those who do not want to get their hands dirty on grinding discs and understand the hydrolysis process can take advantage of innovative methods of combating corrosion. Recently, converting reagents have become particularly popular, they simply turn red dust into a gray substance that is easily washed off from the surface of the vehicle.
- "Rust neutralizer BCH-1." Apply to the area of rust and remove it with a rag after a while.
- Orthophosphate acid.
- Set of zinc sprays. Although it does not remove corrosion, it forms a film on its surface that prevents further destruction of the metal.
Working with the body after removing rust: preparation, priming, painting
Immediately after cleaning the corrosion areas, the surface must be thoroughly degreased and primed. However, if the factory primer remains on the metal, there is no need to apply a new one. Primer, first of all, ensures better application of paint and putty. There are several types: leveler, sealant and epoxy primer.
After complete drying, the body is puttied. It is possible to apply several layers of putty, but each of them must be cleaned until completely smooth. After that, another layer of primer is applied and the car is sent for painting.
Corrosion prevention and rust protection
It is necessary to begin to resolve this issue even when purchasing. It is worth remembering that different manufacturers use different types of metals to make structures. For example, BMW and Mersedes cars react more steadfastly to the influence of destructive factors, and Opel quickly rusts even in dry weather.
When buying budget cars, it is worth remembering that manufacturers often skimp on quality and use thin steel in production, which quickly becomes unusable. Therefore, when buying a car, you should focus not on the brand and make, but on the technical characteristics.
During operation of the vehicle, it is necessary to “look after” it, namely:
- keep in a dry and well-ventilated area;
- do not neglect car wash using shampoos;
- In case of painting, follow the technology. Corrosion does not form due to a thin layer of paint, but due to cracks and chips on it;
- Carry out regular vehicle inspections. Ideally, this is best done once every 1–2 years;
- use various anti-corrosion agents, wax.
The main enemy of a car is rust. Today there are many ways to combat rust. However, in order for the iron horse to serve faithfully for many years, it is better to prevent the occurrence of corrosion. Even the smallest “bug” can provoke major body work.
Fighting rust on the body
Rust on a car body is a nightmare for any car owner. If corrosion is not eliminated in time, then in a short time it will quickly spread throughout the body and bottom and corrode the metal down to holes. To avoid such negative consequences, you need to know about various rust control methods.
Before talking about various methods of fighting, you need to understand why the car body rusts. This process is described in detail in chemistry textbooks: when iron interacts with water, air, acids and alkalis, chemical reactions occur, as a result of which we obtain iron oxide and hydrogen.
Since the body of any car is a thin sheet of steel with a layer of paint applied to it, the main task of anti-corrosion treatment is to protect the steel from direct contact with the environment.
They do this using various means, many of which we have already written about on Vodi.su:
- Ceramic Pro protective coating - effectively repels water from the surface of the machine;
- Dinitrol 479 - anti-corrosion body protection and sound insulation;
- Carbon-type vinyl films - by covering the body with them, you avoid the appearance of small scratches and chips;
- waxing is an effective method, especially in anticipation of the coming winter, when tons of reagents are poured onto the roads;
- galvanizing - one might say the most reliable method, although expensive;
- electrochemical - contradictory techniques using devices such as “Rust Stop” or “Final Coat”.
When you buy a new car, it usually has undergone all the necessary anti-corrosion treatment. In this regard, German and Japanese cars are famous, since their manufacturers use all available means - the same Dinitrol for the bottom and wheel arches, special water-repellent paints and varnishes, galvanization. This is easy to verify by comparing the condition of an Audi A100 produced in 1990 and a domestic VAZ-2104.
Chinese budget cars, for example Chery Amulet or Lifan X60, do not have good rust protection, so the body rusts very quickly in the most problematic areas:
- thresholds;
- wheel arches;
- places of joints of parts.
Thus, if you want your car to last as long as possible, use any of the above methods.
But what to do if the first traces of corrosion appear on the body?
Rust removal
The slightest chip of paint when the metal base is exposed must be repaired immediately.
Several options are possible:
- minor damage that does not reach the base - polishing;
- a layer of soil is visible - local painting;
- deep cracks - treatment of the damaged area followed by painting, varnishing and polishing.
It is worth saying that often such scratches are not visible due to a layer of dirt and dust, but after washing they are clearly visible. Polishing shallow chips comes down to applying a clear varnish or a special polish. If primer and metal are visible, then it is necessary to select the appropriate paint and varnish - we have already written about the selection of paint on Vodi.su.
It is much more difficult to defeat deeply ingrained corrosion; for this you will have to buy a rust converter.
The algorithm of actions is as follows:
- we clean the damaged parts of the body - sandpaper or medium-grain sanding attachments on a drill will do;
- or we treat it with anti-corrosion compounds (WD-40, Rust Killer, Rust Treatment) - they not only dissolve iron oxide, but also degrease the metal;
- then proceed according to a simple scheme - putty (if there were dents), apply a primer, then paint and varnish;
- polishing
It is clear that it is better to entrust this work to specialists who can select the desired shade and polish everything correctly - there will be no traces of dents or cracks.
There is also such a service as galvanizing - it is also done at home, when zinc in the form of a thin coating settles on problem areas.
Much has been written about electrochemical protection, which protects against the very appearance of corrosion. This method raises doubts among many, since small plates under low voltage are attached to the body. Such devices are quite expensive, and their effectiveness has not been proven, so seasonal anti-corrosion treatment once a year before the onset of winter will be much cheaper.
